Manufacturing & Material Specs
- Material
- 3 mm acrylic lobes plus a metal bearing
- Thickness
- 3 mm lobes, about 70 mm across
- Printing Technology
- Double-sided UV, optional center-cap print
- Contour Cutting
- Bearing hole fit ±0.1 mm
- Surface Protection
- Lobes masked, bearing installed
Prepress Artwork Preparation Guidelines
- Resolution: 300 DPI at 100% physical print dimensions.
- Color Profile: CMYK mode recommended. RGB files are converted with minimal shift.
- Bleed Margin: Keep main character lineart 2mm inside the outer cut border.
- White Underbase: If you desire transparent stained-glass effects, specify in notes.
Acrylic Fidget Spinner Charm
Three printed lobes share one quiet bearing. Overall width is about 7 cm and each lobe is 3 mm, lighter than an all-metal spinner and easy to match to a character palette. The center cap can carry a small badge. There is no key hole unless you ask; if you want a bag charm we add a 3 mm hole on one lobe, and the strap should come off before it spins. Order from 1 piece, about 5 business days. Do not wash the bearing. Draw the three lobes flat and leave an 8 mm clear circle in the center for the bearing hole.
6. Volume Quantity & Tiered Wholesale Pricing
Factory direct volume rates: unit prices drop automatically as quantity increases.
Artwork & Design Files
High-definition Japanese UV print file preparation
Upload Front Artwork
300 DPI Transparent PNG recommended
Upload Back Artwork (Optional)
Leave empty to automatically mirror front
For 10 customized pieces (10-49 pcs)